HTVRont Auto Tumbler Heat Press

Machines
1

Does anyone in here have the Tumbler press? If so, at what temps and time do you press your tumbler and Libby can glasses?

I followed the settings on the website, but I think the temp is too high as part of my black print turned brown.

9 Likes
2

Hello @Yoerika83 :wave:

Here are the recommended settings, have you tried the following setting:

  • Stainless Steel Tumbler:
    Temperature: 370 ± 10°F
    Time: 130 ± 20 seconds
  • Ceramic Tumbler:
    Temperature: 385 ± 10°F
    Time: 400 ± 20 seconds
  • Glass Tumbler:
    Temperature: 370 ± 10°F
    Time: 300 ± 30 seconds
7 Likes
3

Use the above settings as a guide to get started but you may have to do some testing to get your perfect. Because we all live in different climates and use different brands of blanks etc.

When black turns brown it could be because it was to hot or you pressed for to long. I normally change my time settings before I change the temp. If your black turns green it was too cool or the time wasn’t enough.

4 Likes