I’ve tried calibrating it and I’ve switched out the blade just in case. What is going wrong. Thank you.
4 Likes
Can you post photos of your project so it’s easier to see what is going on for the person that may be able to help more. I do not have the machine so can’t give a lot of advice on it. Bu if you send photos of the results your seeing and the setting you have that will be helpful.
4 Likes
Hello, welcome to the community! What settings are you using? Are you selecting “Other” in the material options? If so, you’ll probably have to set the force to 300+. I don’t have the iCraft, I have the Crafter, but mine won’t make any cuts at a force less than 300 if I select “Other.” I mostly use the Loklik or HTVRont options at a force of 6.5 - 7.0 — if I’m cutting those brands of vinyl. If I’m using other brands’ vinyl, I set the force to at least 300.
4 Likes
I just calibrated it using the paper and then cutting directly on vinyl seems to be fine now. Thanks so much!!
3 Likes
I calibrated it using the paper and then the vinyl and it’s working. thank you
3 Likes
Awesome! You’re very welcome. I’m happy it’s working for you. At times, mine will go through the motions, but never make a cut, either. But upon running it a second time it works fine. 
I think these machines have a mind of their own.
2 Likes