Loklik cutting machine

Cutting Machines
1

Pede po ba ang loklik machine sa magnetic sheets? If pede ano po ang setting nya?

4 Likes
2

:white_check_mark: Yes, with the right blade and settings:

  • Use the Deep-Point Blade Kit, which is designed for heavyweight materials up to 2.0 mm thick.

  • Magnetic sheets like PVC template magnetic sheets and EVA foam board are listed as compatible materials

:hammer_and_wrench: Setup Tips for Cutting Magnetic Sheets

Blade & Pressure:

  • Install the Deep-Point Blade (not the standard fine-point).

  • Increase cut pressure and consider multiple passes depending on sheet thickness.

Mat & Placement:

  • Use a strong grip mat to prevent shifting.

  • Tape down edges if needed—magnetic sheets can curl or resist adhesion.

Design Considerations:

  • Avoid overly intricate cuts; magnetic material may tear or snag on tight curves.

  • Use the Print Then Cut feature for magnetic bookmarks or stickers with clean outlines B.

:magnet: Recommended Cutting Force for Magnetic Sheets

While LOKLiK doesn’t publish an official preset for magnetic sheets, based on user tests and comparisons with similar machines, here’s a solid starting point:

  • Cutting Force: 500–600 grams
  • Blade Type: Deep Cut Blade (60°)
  • Passes: 2–3 passes (depending on thickness)
  • Speed: Slow (to ensure clean edges)
  • Mat Type: Strong grip mat (to prevent shifting)

These settings are ideal for thin magnetic sheets used in crafts like fridge magnets or bookmarks. If you’re working with thicker or adhesive-backed magnetic material, you may need to increase the force slightly or add an extra pass.

6 Likes
3

Thank you so much❤️

3 Likes
4

Yes thank you, I have a couple of sheets but didn’t know what to do with them. At least I know the cutting info when it comes time.

3 Likes