Ooooh this wreath is so cool!!
7 Likes
Mood today: busy. Feel like mom duties are endless but Iâm happy just need to learn to plan my day better
12 Likes
Dang, youâre right. I figured the All Time would show, well, ALL TIME points accumulated. However, itâs showing the total I have now, and Iâve redeemed some of mine, as well. It would be nice if it showed the actual All Time total.
8 Likes
Day 39 Mood Happy to have my iCraft up and running and to have my clay and resin project finished. Just waiting on the resin to cure a little more before I post it to the home-decor event. Now to figure out what Iâll be making this week. 
Wishing you all a wonderfully creative week! 
11 Likes
Day 39. Today I am feeling overjoyed. I get to fellowship with @Felicia_Roberts at a crafting event last night. It was so much fun. @Felicia_Roberts how are you feeling today?
12 Likes
Ok, cool. Iâm glad itâs not just mine. I figured it must be normal since it only happens while reading the marks. It would definitely be wonderful to not have it disconnect until I decide to disconnect. 
6 Likes
Wonderful! It looks like you ladies had a fabulous time! Happy for you both!
7 Likes
Thanks @DianeB! I love that I can 3D print new brick pieces to attach for each holiday and season.
8 Likes
Itâs a great idea 
6 Likes
Enjoying another blessed day. Looking at the beautiful snow covered trees and hills & grateful for yet another day. Staying warm in front of our pellet burner and working on new Spring projects.
13 Likes
Feeling a bit sad today.
After spending time the other day cleaning my mats, look what happened to one of them this morning. My question to you is would you just scrap it and start using a new one or would you tape it up from the back and see if itâll still work?
14 Likes
@Nancy_Sierchio - Oh, I bet you have a beautiful view while being warmed by the burner! Canât wait to see your spring projects!
@MaterialGirl - Sure, you could tape the back and still use it. Just maybe not for deep cutting or very detailed projects, as that may cause an issue while cutting. You could place the designs out of the way of the tear, if you have small enough projects. But it should be fine if youâre using vinyl with a plastic carrier. Just try to make sure it pieces back flat and thereâs no lump in it.
11 Likes
Day 39 - Pretty cool to see the sun shines once again this morning! Have a Blessed Sunday, Beautiful People!
13 Likes
Todayâs mood is wahoo Iâm going on a girls trip tonight!
10 Likes
I would tape it with clear packing tape but you can also cut it down into a smaller mat for smaller projects.
11 Likes
Oh, wow! Beautiful! Iâm in Southeast Texas, so I donât get to see much snow. We got about 4-5 inches last year, which was the most Iâd ever seen here in the 23 years Iâve been here. Before that, I think maybe an inch was all we had gotten. In 23 years itâs snowed 4 times. Thanks for sharing your beautiful snowy view with me!
12 Likes
Here in NJ we donât get a lot of snow either for decades now but this year Winter started in Oct when it doesnât usually begin until Jan/Feb. I love the way it looks but mostly hibernate in the cold Winters. We were in Austin about 7 years ago. Absolutely loved it but I know Iâd miss our mountains. Have been to Houston too but it was so hot and dry I couldnât stay hydrated LOL.
12 Likes
Yeah, Iâm near Houston, and our winter just started⌠Well, kinda, it was 74° the other day. Weâve had some cold days, on and off, but more warm days than cold. We get all 4 seasons pretty much every week, just no snow. We will get ice, though. This week, we have mainly cold temps, with some high 60s later in the week, I think. It could definitely change. And, yes, itâs very dry here, as far as rain goes. It either rains for months at a time, or we get no rain for months. We had a very dry year, this past year. However, itâs usually really humid during the hot months, as weâre so close to the Gulf, my family members always complain about the humidity when they come down here.
9 Likes
Interesting that you mentioned the Bluetooth speaker interfering with the Bluetooth on the crafter. Yesterday I couldnât get my speaker to connect to my phone. It worked eventually but then this morning I couldnât get my crafter to connect to my PC. In the end, I gave up and used the USB. Itâll probably be fine next time I use it 
11 Likes