Print and cut (calibrate)

General
1

I have questions, haha. Those of you in the United States, how do you calibrate the machine because it only lets you use A4 paper and here it is very difficult for me to find that size of paper?

7 Likes
2

Have you tried letter size? I think you can also use that just dont select the letter size in the printer choices, still use a4 as paper size but feed printer with letter sized paper

6 Likes
3

I have that same problem. Have not figured out what to do yet. I hope you find a solution

3 Likes
4

I have completed a test on how the A4 paper and the US letter paper works if your using the LOKLiK iCraft and callibrating for Print then Cut. (i used 2 diferent printers)

Test 1: If your printer is an A4 printer, use A4 paper and callibrate following the directions.

Test 2: If your using a US letter printer, use letter settings as you normally would for the paper size, following the directions.

NOTE 1: if you are doing a print then cut callibration on a US letter printer and paper size, it makes no diference if you change your print settings to A4, it’s not necessary.

NOTE 2: what does happen if you use a letter paper size to print before you do the callibration cut? the only noticable diference is that the letter B does not print on the bottom as it does on A4 paper, just hand write it on if you want.

NOTE 3: I did not continue on with the callibration using the letter size print to cut callibration process, because i completed the callibrated on my A4 test and did not need to calibrate a 2nd time.

8 Likes
5

Yes, and still not cutting good

5 Likes
6

I see a video on YouTube and I fixed :smiling_face_with_three_hearts:

7 Likes
7

What did you to do to fix the cutting?

5 Likes
8

Thank you I will try and see if this works for me!

6 Likes
9

that’s great! which video did you follow Yirda?

4 Likes
10

I see a video on youtube,the person name is (neverdenyme) video tottle(how to calibrate the loklik for print & cut)

5 Likes
11

The person name is (neverdenyme) video tottle(how to calibrate the loklik for print & cut)

5 Likes
12

Thanks Yirda!

7 Likes
13

Me Excited to have one .

4 Likes
14

480854020_2370488133310623_3596752625896556352_n
480854020_2370488133310623_3596752625896556352_n904×1920 191 KB

482131306_1998408420638035_6311598819572834486_n
482131306_1998408420638035_6311598819572834486_n904×1920 70.7 KB

5 Likes
15

@timmytation she teach me how to get the right cutting :slight_smile:

5 Likes
16

Hahaha kahit banned ni meta pede nmn pla dito :rofl::rofl:

4 Likes
17

maam speaking in english :laughing:

6 Likes
18

Hangang kelan ba yan baka maubusan kna ng dugo

4 Likes
19

maam chatgpt is the answer hahahaa

5 Likes