Slice feature

Feedback
1

Do the loklik crafter have the slice feature?

5 Likes
2

You can’t slice png images YET on the software zone I’ve made a post about it and hopefully they’ll add the feature to the coming updates /

4 Likes
3

loklik crafter not reading registration marks

4 Likes
4

lets get some trouble shooting started, what material did you print on @Ronel_Smart :+1:

4 Likes
5

Hi @Ronel_Smart, sorry to hear you are having print then cut issues.

Some things to check out

  • Have you updated firmware and software?
  • Have you done a print then cut calibration using the same material as your project?
  • Try closing the top lid if your room is very bright, if you have a very dark room try turning the light on.
  • Make sure to place the print then cut project in the top left-hand corner of your light blue cutting mat.

Let me know how you go.

3 Likes
6

Add this:

  • Check if the printed sheet has a good black print of the reading marks:

too dull? trace them over with a black marker.

too shinny? try printing on a non-glossy surface (place masking tape over the area), or place something like masking tape on that area of the already printed sheet and redraw the lines using a black marker and a ruler.

3 Likes