Very important message from the manufacturer

Material
1

For the cutting of the wooden boards:

For now, w**e only tested basswood in 1.5mm thickness, with force 5.5, speed 2 and passes 6; for 1.7mm basswood it cuts very difficult and has some rough edges;

For the metal sheets:

The metal plate is difficult to cut, the tip of the blade is easily to collapse and damage**​

=> This is not advised or even possible

5 Likes
2

I think in cricut they use a knife blade for thicker and denser materials, not sure if it can be used with loklik.

2 Likes